Workshop Wednesday 2016 #10 The Last 2015/2016WW

Backproblems cause a lot of pain last year and riding motorcycles was not the best to do, specially the hardtail but I also had trouble on the Buell X1. So I made a back rest out of a 1986 sissy bar from the "Flat tracker" when it was original. Two book rack stands made it fit perfect underneath the bag holder so I have some extra support in the back. I told you before the Buell is going to be a Bagger....Its still for sale but as long as the money is not in my pocket I keep on cruising the beast.

Workshop Wednesday 2016 #9

Ugly Hitachi starter is covered now with a Biltwell Inc Points cover. Hope to finish the bike end of this week and do some test runs right before the LIBERATOR SHOW AARLE-RIXTEL
March 19-20.

Skidplate

Skidplate ready for the CHOPPERSPEEDWAY AARLE-RIXTEL March 19th 2016, come and beat me!

Workshop Wednesday 2016 #8

Made a skidplate for the Flattracker today, just a piece of aluminium hammered in place, some speedholes to make it lighter and cooler. Some black paint and drilled the holes afterwards to give it a two tone look in Black/Silver. Took an hour but I like it very much and it costed nothing do can't go wrong with that. Some little finetuning things and we are ready for HARLEY & SNOW next month.

Nitro Circus Live 2016

We were very lucky to have these visitors in our shop last week. Bruce Cook, Bruce Robson and Andy Zeiss came over to check our bikes. Thanks for the visit amigo's, the Nitro Circus show was awesome! I will support the @ironandresingarage in Ridnaun at Chopperspeedway next month.

Workshop Wednesday 2016 #7

Haven't been busy with motorcycles lately, only covered the speedometerplug. Reason is the death of Dave Mirra, it has been a rough year so far so hope we had all the bad news for the whole year. R.I.P. Mirracleboy. To honor Dave we all spraypaint our BMX pedals. #goldpedalsfordave.

For Sale! Harley-Davidson XLH1000 1972 EURO 8500,00!

NEED MORE MONEY! So for sale our 1972 XLH1000 Ironhead Sportster. Runs very good, new selenoid/starter. 1986 H-D Wheels and frontbrake, fresh gloss black paint, Biltwell mini mufflers/pegs. Comes with a different seat, you can choose out of any Biltwell seat you want. Sportster 39mm fork, Lowbrow fairing, new Odyssey battery etc etc. EURO 8500,00 or make me an offer I can't refuse.

For Sale! BUELL X1 2000/2001 Millenium Edition #195 out of 800 EURO 5125,00!

I NEED MONEY! So for sale again: BUELL X1 2000/2001 Millenium Edition 195 out of 800.
10.750KM so brand new, New rear tire, new oil/filter comes with the bike, GPS not included but can be bought seperatly for Euro 399.00 extra (Never used so far). Carbon fiber tailsection, Bags included, Universal Motocross handlebars, extra windscreen included but can be removed without marks. This is not MARKTPLAATS so don't even try to lowball me with a silly bid, its an almost new REAL BUELL and for Hoodlum Society readers it is EURO 5125,00!

Workshop Wednesday 2016 #6

Hard week, not a real WW but after changing an innertube I made my pedals gold for Dave Mirra.

Workshop Wednesday 2016 #5

Brakepedal was junk all the time but I "repaired" it and it worked for a while. With the bike totally rebuild it is safer to install a new one. Easy to buy at Motorcyclestorehouse/BaMo Tech so while waiting I took a BMX Seatpost and made a spacer out of it for the brake pedal. Shimano DX pedal inserts will hold the spacer/brake pedal axle in place. And last but not least: a flat front tire...yes that was the last thing I didn't touch so now I had 100% of the bike in my hands.

Workshop Wednesday 2016 #4

Plumbing: Oil lines are installed, waiting for clamps but it will look pretty clean when ready. No more shitty "Braided" oil lines, just plain rubber will do the job. This is almost the last real big job to be done and than it will be placing the battery, clutch cable, exhaust, airfilter etc etc, well not really the last big job then.

Workshop Wednesday 2016 #3

Before I opened Paul's Boutique BMX I was saving money for a BUELL S3 Thunderbolt like you see in the picture. I liked the idea to have a fast "Harley-Davidson" to commute between house and work but it never happened. In 2003 I bought a Buell X1and till today I only rode about 5K km with it and its time to use it more. I will turn this motherfucker into a "bagger" with bags, backrest, GPS and a windscreen. I was looking for a windscreen on the internet and everything I saw sucked so I made one fram an old windscreen laying in the workshop. Need some finetuning but I guess I will like it, next up is a proper GPS, NO TOMTOM cause I hate that company! Guess it will be a Garmin.

Workshop Wednesday 2016 #2

These parts were replaced on the new '67 Ironhead engine, I can almost build another engine... Only missing a few parts....

Workshop Wednesday 2016 #1

Chopper speedway is sooner than you think! Be ready, I AM! Beat me if you can, I don't care.

Last day of 2015!

2015 was not my best year but the last day was awesome! Biltwell Inc is going to support my "Harley-Davidson Racing career" in 2016 and today I received two boxes filled with the finest Biltwell Inc stuff. Beyond stoked I am with thiw care package and can't thank McGoo and Bill enough for their ongoing support. I will do my best to keep on promoting Biltwell in Europe as good as I can. Had to try the new GRINGO S helmet today, I never rode a bike on December 31st but my friend "El Nino" made it possible this time. 2016 will be a RAD year!