Wednesday, May 14, 2014

Bedford Camper for sale! 1973 LPG





SOLD! SOLD! SOLD! SOLD! SOLD! SOLD! SOLD! SOLD! SOLD! SOLD! SOLD! SOLD! 

For sale: our 1973 Bedford CF350 4cyl 2.3ltr Camper. Needs a new engine, this one is running but headgasket is leaking. Engines for sale at Van Dijk Reeuwijk and Bedfordgarage Smilde.
Clean inside, no leaks, two beds, kitchen with working fridge (12v/220v/Propane/ 3x cooker on Propane. All lights are working (12v lights and separate 220v lights). New Omnistor 4.5m canopy with two new side walls, new rear Firestone heavy duty tires. LPG system, APK till June 22nd etc etc.

Take it or leave it for € 1500.00, Canopy/walls/tires/matrasses etc are worth more so we don't want to have tire kickers and "I have to ask my Mom or Wife" buyers, don't waste our and your time.

Wednesday, May 7, 2014

SNAFU Kicker BMX Pedal



Kicker pedal was made from an old SNAFU BMX pedal and old Harley-Davidson foot peg but it didn't work that well so I made a new setup. Took the last part of the H-D foot peg and welded a piece of BMX crank on top so I can tread in every BMX pedal I want. SNAFU is my favourite BMX Pedal brand these days so I took a brand new Sealed Bearing SNAFU pedal. Hope it will never hit me in the shin cause those steel pins are not gentle. BMX Rules!

Friday, May 2, 2014

Webco BMX Brake pedal arm







Brake pedal from the 1972 Ironhead was a 180mm Webco BMX crank and was a bit to long so I cut 1 1/2 inch out of it, put a piece of a FIT frame in it to make it stronger and welded the two pieces together. Welds are shitty like always but with a grinder I made it as smooth as possible. Now the shifter and brake pedal are the same. Took me 2 years to do it but finally I found some time.